As people’s awareness of energy saving, energy saving lamp becomes more and more into the average family. But often it was found that energy-saving light effect does not seem too good to use, why? Mr. Lee, many years of operating lamps, which may be some way related to inappropriate use of energy-saving lamps. The proper use of energy-saving lamps, energy saving it the best? Lee give you some advice.

First, the use of energy-saving lamp lights on when to pay attention to the use of marked voltage, if low-voltage sodium lamp used in high voltage power supply, lights will burn. Select a country must also pay attention to approval number, site, telephone and so clear brand clear quality standards, vigilance and refuse to use inferior, as far as possible not to select the site or the site that do not obscure brands. Second, pay attention to selection and proper use of the lamp power. In general, the energy efficiency of light can be 5 times higher than incandescent lamps. Example, using the original 60-watt incandescent room, use energy-saving lamps need only 13 watts is enough, you need according to their brightness can choose the power of different energy-saving lamps. Again, to minimize the number of light switches. It is understood that each switch an energy-saving lamps, lamp life at around 3 hours or so lower, if you do not want to change lamps often, it is best to reduce switching frequency. Finally, pay attention to timely replacement lamp. Lamps in use for some time, a sharp decline in flux, light will become increasingly dark, this time to replace them with new lights to keep the room light in the best results.